Medical Isolation Stretcher Medical Negative Pressure Compartment Transfer Bed Equipment Supply

Medical Isolation Stretcher Medical Negative Pressure Compartment Transfer Bed Equipment Supply

Technical Specification

1. Product basic principles
    The negative pressure isolation compartment (bed) is established by the clean unit and maintains the negative pressure environment in the closed cavity. The polluted air in the wall cannot overflow without purification, thereby providing effective protection for medical staff; fresh air outside can be replenished in real time after purification Into the cavity, maintain reasonable fresh air in the cavity; through medical PVC gloves at the operation port, medical staff can provide simple care to the patient. The negative pressure isolation cabin is a completely enclosed space, which can play a good isolation role in transferring suspected or confirmed cases. It can be used for SARS, avian influenza, HINI, Ebola, new  and other patients Isolation and delivery is a new product for the prevention and control of new  epidemics.
Product design

(1) Structural design
    The negative pressure isolation cabin is mainly composed of a foldable cabin and a clean unit. The cabin uses a foldable, highly transparent TPU membrane material to form a relatively closed space, and the clean unit consists of high-efficiency filters, pressure differential monitoring, DC fans, and so on. The entire cabin body is made of TPU film heat-sealed. The cabin body is airtight, high mechanical strength, overall permeability, and no patient depression. In the choice of support structure, the arc-shaped support made of ABS material is used. The corners are dull to reduce the harm to the human body; the overall housing of the negative pressure generation system is made of ABS material, which integrates high-efficiency filters, DC fans, control units, lithium batteries, negative pressure testers and other components at the air outlet, and is waterproof. And corrosion resistance, real-time monitoring of cabin pressure, battery power display and other functions; Finally, the high-efficiency filter housing also uses ABS material, which not only achieves high filtration efficiency and guarantees the effect of low air pressure drop. For 0.3 μm The filtration efficiency of the particulate aerosol is not less than 99.99%, which can effectively prevent the overflow of infectious bacteria.

(2) Control design
    Design an intelligent control system based on a single-chip microcomputer. The built-in single-chip microcomputer controls the fan speed. The internal pressure is collected by a pressure sensor. When the internal pressure is higher than -15 Pa, the single-chip microcomputer controls the fan to automatically adjust the speed and control the LED lights and buzzer for sound and light. Alarm; integrated operation panel with power display and alarm, cabin pressure display and alarm and other functions, and has the ability to waterproof and corrosion resistance. The distribution of airflow inside the cabin has an important impact on the safety performance of the negative pressure isolation cabin. How to reasonably distribute the air flow in the cabin to achieve a good flow and dispersion effect is very important for the safe isolation of infectious bacteria in the cabin. In the design, Fluent software was combined with the fan characteristic curve, and the multiphase flow model turbulence model was used to test the airflow field in the cabin. According to the actual operation of the negative pressure isolation cabin, the air outlet plane at the negative pressure generating system is set as the cabin air outlet, and the pressure is given by the fan curve. The height of the opening of the high-efficiency filter on the bottom side is consistent with the height near the mouth of the simulated infectious patient, and it is set as the air inlet. Infectious patients often have sneezing symptoms. The simulated air velocity of the mouth of the patient is about 2 m / s. Simulation tests based on the multiphase flow model turbulence model show that the flow and dispersion of the airflow in the cabin is good, and there is no airflow short circuit.

3.Parameters
    Basic parameters of negative pressure isolation cabin (bed):
(1) Expanded size ≥ (L × D × H) 1900mm × 680mm × 500mm;
(2) Internal power: DC 12V;
(3) Ventilation volume: ≥50L / min;
(4) Negative pressure value: ≥15Pa (within 2min);
(5) Cleanliness: the filtration efficiency of 0.3μm aerosol particles is not less than 99.99%;
(6) Noise level: ≤65dB (A);
(7) Charging time: 6h;
(8) Discharge time: It can be continuously pumped (negative pressure) for about 4 hours by battery power under normal conditions;
(9) Alarm: low pressure and low battery alarm;
(10) Outer dimension of packing box (L × D × H) 680mm × 880mm × 500mm;
(11) Weight: gross weight 30KG net weight 20KG;
(12) Number of users: 1 person;

4. Product Features
(1) The material of the negative pressure isolation cabin is made of high-quality, durable and pollution-free high-strength transparent material. The cabin is sealed with a waterproof sealed zipper.
(2) The negative pressure isolation cabin is supported by 5 supporting rods in an arch shape, equipped with 2 oxygen inlets for infusion and oxygen delivery of patients; 10 operating ports are equipped, and disposable gloves are put on to facilitate the care of patients in the cabin .
(3) It can be used together with a stretcher and a stretcher cart to facilitate the movement of patients.
(4) With optional stretcher, the load can reach 150Kg.

 

Packing & Loading


Application Scenarios





Certificates


Our Services

1. If you are building a new hospital, we can offer your solutions of OR and ICU room;

2. Our sales team give you the quotation and answer your any questions and doubts about products;

3. You are welcome to visit our factory at any time;

4. we will offer you the solutions of quality problems within 24hours;

5. our after-sales service:

 Warranty: 1-2years due to different products, and lifetime maintaining.

 A. Engineer goes to your hospital and Provide on site customer training and guide.

 B. We send the free parts to you by courier and give you technical guidance via online video.

 C. We support you free training of products.

Exhibition


 

Q: Are you manufacturer ?
A: Yes,we have our own R&D team and sales team,We provide you one-stop service.

Q: Do you have CE,RoHS,ISO13485,ISO9001?
A: Yes,our products are approved by CE,RoHS,ISO13485,ISO9001.

Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.

Q: What is your Payment term?
A: 1. L/C at sight.
    2. T/T:30% deposit by T/T,70%balance by T/T before shipment.
    3. Trade term:EXW, FOBShanghai or CIF&CFR.

Q: What is your Packing details?
A: 1. Wooden case or carton package,standard export packages.
    2. All of the productions are inspected carfully by QC before delivery.

Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit;
If we don't have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order.

Q: What is your Min.order?
A: There's no minimum quantity.